Leader NEO Gas-Driven Fan MT236, 19,810 CFM AMCA

Leader NEO Gas-Driven Fan MT236, 19,810 CFM AMCA

The Leader NEO Gas-Driven Fan MT236 has a flow rate 19,810 cfm AMCA.

Leader NEO MT236 gas-driven fan has a performance superior to the competition in its class.

The MT236 Fan generates a highly concentrated and ultra-powerful oval air jet thanks to an optimal combination:

• Highly resistant propeller adapted to the power of the engine
• Red double-layer monobloc shroud made of reinforced high-density polyethylene
• High-tech composite grille

CERTIFIED PERFORMANCE
The AMCA and open air flow rates of LEADER fans are all tested and certified by independent laboratories.

POSITIONING FROM 3 FT TO 20 FT
MT236 can be positioned from 3 Ft TO 20 Ft in front of a door without loss of power. This allows firefighters to have more space to manoeuvre and reduces the noise level inside the ventilated building.

AUTOMATIC TILT AND STABILISER PROP
When raised, the lifting handle automatically positions the fan at its optimal angle of tilt. The ability to withdraw the unit and tilt it to its maximum angle makes ventilation possible in these situations: Raised doors and windows, entrance steps, landings, etc. In addition, it is equipped with a stabiliser prop at the rear, which also allows the fan to be tilted at -10° for downward ventilation (ventilation of semi-basements, for example).

Specifications:
OPEN AIRFLOW 30,400 CFM

PPV FLOW RATE ACCORDING TO AMCA 19,810 cfm

WEIGHT 87.3 lbs.

DIMENSIONS 22.6″ W x 22″ H x 19.3″ D

PROPELLER DIAMETER 16.5″

AUTONOMY 2h10 at full speed

ENGINE HONDA GX 160 engine (4-stroke)
Automatic engine stop system in case of lack of oil
Assembly inspected and approved by Honda Motor Co., Ltd.

ENGINE POWER 4.8 HP according to SAEJ1349 standard of 2007

NOISE LEVEL 93 dB at 10 Ft

VENTILATION TYPE PPV blowing

APPLICATION Single door – houses, small buildings