Hale HPX275-B35 Portable Firefighting Pump

Hale HPX275-B35 Portable Firefighting Pump
545-5200-00-0

When you need to move a lot of water, the Hale HPX275-B35 Portable Firefighting Pump is a high quality pump that is engineered to perform.

Performance
The pump/engine shall be capable of meeting the NFPA 1906 performance rating of 50 GPM @ 150 PSI and 150 GPM @ 100 PSI. Typical pump performance from 5 foot draft at sea level shall be:
170 GPM @ 150 PSI
250 GPM @ 100 PSI
290 GPM @ 60 PSI

Pump
The pump body shall be made of anodized alloy aluminum castings coupled together with a stainless steel band clamp with an O-ring seal which allows quick pump volute removal for servicing. The pump end shall be factory hydrostatically tested to 300 PSI. The impeller shall be bronze. The renewable clearance rings shall be made of bronze to inhibit galvanic corrosion. The impeller shall be 8.75 inches (222.3 mm) in diameter and designed with a sleeve back end to prevent water from coming in contact with the engine shaft. The pump shaft seal shall be an automatically adjusting, maintenance free, mechanical type. The pump body shall be equipped with a petcock drain valve.

Control Panel:
Discharge gauge
Priming lever
Start button
ON/OFF switch
Oil warning light
Choke
Throttle control

Priming
The pump shall be equipped with a diaphragm type hand primer.

Suction/Discharge
The suction port shall be a 4” grooved coupling and the discharge port shall be a 3” FNPT discharge flange.

Engine
The engine shall be a 4 cycle gasoline Briggs and Stratton Vanguard 613477 series V-Twin, overhead valve, air cooled design. Engine rating shall be 35 BHP at 3600 RPM. Engine displacement shall be 993cc and shall be designed to meet current EPA (Environmental Protection Agency) standards. A 12-volt electric system shall be provided with electric starter and a 20 amp alternator. Engine shall be equipped with a residential muffler with USDA approved spark arrestor.

Mounting Platform
The pump/engine shall be isolation mounted onto a steel base.

Instrumentation
The pump shall be supplied with a remote mounted control panel. This panel shall include a throttle lever, primer lever, master switch, starter button, choke control, a 2.5 inch liquid filled discharge gauge and an oil pressure warning light.

Features
Flows ranging from 170 GPM @ 150 PSI to 250 GPM @ 100 PSI
Ultra-reliable Briggs & Stratton 35-HP 4-cycle V-Twin big bore gasoline engine
Electric start
Anodized aluminum alloy pump head and body
Pump head and body coupled together with stainless steel band clamp for easy serviceability
Bronze impeller and renewable wear rings
Self-adjusting mechanical seal
USFS Guzzler hand primer
4.0” grooved coupling suction connection; 3.0” NPT discharge
Applications/Solutions
Fire OEMs
Firefighting - Wildland Forestry

3 Year Warranty
Weight 190 lbs (86 kg)
Length 24 inches (607 mm)
Width 23.5 inches (597 mm)
Height 24.38 inches (619 mm)
Fuel Type Petrol/Gasoline

Specifications:

*NOTE: Not for sale or use in California